img {border: none;}
| LNG Tank Hydrotest | |
| ProAct can provide high purity water for LNG Tank Hydrotests. Water sources include sea water, estuary water, or groundwater.ProAct can mobilize reverse osmosis skids, sand filters, bag filters and media,including carbon filtration equipment with the capacity to deliver up to 2,000 gallons per minute of high purity water. We can also efficiently remove the water when testing is complete and place it in adjacent tanks if required. | |
|
ProAct
custom designs the water treatment
system for each project with extra capacity to guarantee delivery of up to 26 million gallons of high purity water in less than 15 days. This extra capacity insures that hydrotest water production and transfer activities are on schedule and do not interfere with the construction time. |
|
Parameter Limitation pH 6-8 s.u. Electric Conduction Ratio Below 500 us/cm@25degrees C Chloride Content Below 200 ppm Water Soluble Sulfate(SO4 2-) Below 200ppm Iron Content (Fe) targeted Below 1.0 ppm Ammonia ion content (NH4+) Nearly 0 ppm Chemical Oxygen Demand (CODMn) Below 15 ppm |
|
| ProAct has years of experience treating water at high flow rates of 2000 GPM or higher. ProAct will facilitate mobilization and speed demobilization by renting a staging yard near the project. And then some! Equipment and pumps are generally 75% of capacity and transfer rates are 25% over specifications. | |
| Safety First! Safety is a priority on every job. Our staff is first aid and 40 hour HAZWOPER trained and participates in medical monitoring and drug and alcohol testing. ProAct has an excellent safety record and is registered with ISNetworld and National Compliance Management Service. | |
|
A ProAct representative is available to provide a solution to your water processing problems. Contact Peter Horrall at (210) 862-6467 or email horrall@proact-usa.com. |
|
| We do it right and we do it right NOW! | |